PCN – Communicating News In Protective Coatings Globally in Real-Time
Leading Source of Industry News on Protective Coatings for Oil & Gas, Pipelines, Marine and Construction
NEWSMAKERS: * Akzo Nobel * Aramco * Belzona * Chugoku * CORROSION 2021 * CUI * ExcelPlas * Failure Analysis * Graco * Hempel * Jotun * International Paints * Intersmooth® * LNG * MCU * PCN * Protective Coatings * Teknos
INDUSTRY NEWS
Hempel Gets New Board Member on Board of Directors
https://www.coatingsworld.com/contents/view_/2021-03-22/karsten-munk-knudsen-nominated-to-hempel-as-board-of-directors/
MCU Develops Ceramic Insulation Coating With Continuous Service Temperature of 230 deg.C. for LNG Applications to Prevent CUI
https://cloud.excelplas.com/s/o0fC1z1stAPvBsT
Akzo Nobel Seeking Area Sales Manager, Marine And Protective Coatings
https://www.careerone.com.au/jobview/area-sales-manager-marine-and-protective-coatings/d6462313-a638-4d43-a196-a37bede5c74c
AkzoNobel Launches New Self-Polishing Intersmooth™ Marine Coatings
https://www.coatingsworld.com/contents/view_/2021-03-23/akzonobel-launches-intersmooth-7200si-spc-intersmooth-7476si-spc/
Aramco Sees 2020 Profits Drop to $49 billion
https://apnews.com/article/dubai-saudi-arabia-united-arab-emirates-health-coronavirus-pandemic-672f523f199c133b4b9c819eea5acf6b
UK Start-Up Raises $1.2 Million to Expand Sales of Smart Corrosion Inhibitors
https://www.pcimag.com/articles/108536-uk-start-up-raises-12-million-to-expand-sales-of-smart-corrosion-inhibitors
MARINE COATINGS
Chugoku Marine Paints Expands Their Portfolio of Selektope®-Containing Antifouling Coatings
https://www.hellenicshippingnews.com/chugoku-marine-paints-expands-their-portfolio-of-selektope-containing-antifouling-coatings-in-japan/
Jotun Launches Advanced Hull Optimisation Programme for Marine Coatings
https://www.seatrade-maritime.com/ship-operations/jotun-launches-advanced-hull-optimisation-programme
https://www.drycargomag.com/jotun-launches-hullkeeper
Smart Protective Coatings Project for Marine Coatings
https://www.marinelink.com/news/tech-file-smart-protective-coatings-486220
Best-in-Class Marine Coatings
https://www.grapheneenterprise.ca/
NEW PRODUCTS
Belzona Introduces a CUI Epoxy Coating Requiring Minimal Surface Preparation Belzona 5841
An epoxy coating requiring minimal surface preparation for in-situ repair and protection of hot metal surfaces subject to corrosion under insulation
https://www.belzonanorcal.com/en/products/5000/5841.aspx
Graco KING the First Electric Sprayer for Protective Coatings
https://www.youtube.com/watch?v=bolev925f7Y
Is your CUI Protective Coating Suitable for Thermal Application?
https://topic.echemi.com/a/is-your-cui-protective-coating-suitable-for-thermal-application_143495.html
NEW RESEARCH
Epoxy-Matrix Polyaniline/p-phenylenediamine-functionalised Graphene Oxide Coatings with Dual Anti-Corrosion and Anti-Fouling Performance
https://pubs.rsc.org/en/content/articlehtml/2021/ra/d0ra10665h
Evaluation of Protective Coatings for High-Corrosivity Category Atmospheres in Offshore Applications
https://www.mdpi.com/1996-1944/12/8/1325/pdf
UPCOMING PRESENTATIONS
CORRSOION 2021 Virtual Conference and Expo (April 19-30, 2021)
• “Shifting the Paradigm of Protective Materials Design Via Self-Healing Functionality,” presented by Gerald O. Wilson, Autonomic Materials, Inc.
• “Premature Coating Failures – Common and Uncommon Causes & How to Investigate Coating Failures When T…” presented by Mike O’Brien, Mark 10 Resource Group, Inc.
https://www.nacecorrosion.org/about
AGM to Present ‘Breakthrough Nanotechnology for Water-based Epoxy Coatings at Corrosion 2021
https://www.graphene-info.com/agm-present-breakthrough-nanotechnology-water-based-epoxy-coating-corrosion-2021
FREE DOWNLOADS
Handbook for Corrosion Protection of Steel Surfaces by Painting (Teknos) [PDF]
https://www.teknos.com/globalassets/teknos.com/industrial-coatings/metal-wet-paints-general/handbook-for-corrosion-protection.pdf
THE APPLICATION AND INSPECTION OF MARINE COATING SYSTEMS ) [PDF]
https://ww2.eagle.org/content/dam/eagle/rules-and-guides/current/survey_and_inspection/49_application_inspection_marine_coating_systems_2017/Coatings_GN_e-Jan17.pdf
Guide to the Best Solution for Not-So-Large Corrosion Problems
https://www.corrosionpedia.com/guide-to-the-best-solution-for-not-so-large-corrosion-problems/2/7296
FAILURE PREVENTION OF PROTECTIVE COATINGS
15 of the Most Common Causes of Failure of Protective Coatings & the Type of Failure (from ExcelPlas 25 Years of Experience)
1. Inadequate blasting and insufficient removal of mill scale from the steel leading to poor adhesion
2. Use of blasting grit with soluble salt contamination leading to osmotic blistering and under film corrosion
3. Oil contaminated compressed air used for blasting leading to surface contamination leading to poor adhesion and delamination of the coating
4. Inadequate blast profile i.e. shallow valleys leading to poor adhesion
5. Excessive blast profile i.e. high peaks leading to poor steel coverage and risk of rust-rash corrosion, particularly for low DFT coatings.
6. Excessive delay between blasting and coating causing flash corrosion contamination leading to poor adhesion and corrosion cells
7. Addition of too much thinner that increases the potential for porosity and pinholes in the coating. There is also an increased propensity for the formation of Bernard Cells where there are boundaries of resin rich coating, resulting in “crows feet” cracking.
8. Poor mix ratio of the epoxy with the hardener leading to incomplete cure
9. Inadequate mixing/stirring of the coating before application leading to poor distribution of barrier pigments leading to coating cracks and premature corrosion
10. Inadequate coating specification: lack of suitable topcoat for UV sensitive epoxies leading to chalking and UV breakdown
11. Inadequate curing of coatings leading to less than optimal properties of the coating with increased moisture penetration and formation of corrosion cells
12. Incompatibility of coating if different paint systems are used multicoat application leading to delamination/peeling
13. Poor QA leading to inadequate control of coating thickness (e.g. excessive DFT) leading to cracking of the coating due to residual stresses
14. Poor QA leading to inadequate control of coating thickness: low coating thickness or missing coats can lead to poor barrier performance and premature corrosion
15. Exceeding the recoat window leading to delamination of topcoat from primer coat due to blast-dust contamination or lack of interfacial adhesion.
http://cloud.excelplas.com/s/gkNmGLkROE4AsQT#pdfviewer
Critical Questions for Protective Coatings for Asset Protection in Oil & Gas, LNG:
• Why is the coating not stopping corrosion?
• Why is the coating delaminating or blistering?
• Has the coating been correctly specified / applied?
• Does the coating meet the manufacturing standard, including properties such as correct hardness/cure, adhesion and thickness?
• What surface preparation and atmospheric conditions must be achieved to successfully apply the coating?
• Does the coating have any defects in it? How will these affect performance?
• Why did the coating fail? Root cause assessment.
• How can the coating be successfully repaired/remediated so that it doesn’t fail again?
ExcelPlas Labs can answer these questions
https://www.excelplas.com/wp-content/uploads/2020/01/Excelplas-A4-Brochure-4pp-Coating-NTs.pdf
Condition Assessment of Protective Coatings – Coating Inspection & Damage Assessment
ExcelPlas Labs have been serving the gas, oil and water industries for the past 20 years within Australia, New Zealand and Oceania. The company is a major testing provider to the pipeline and LNG industry. Whether you’re an engineer, consultant, pipeline owner, pipeline operator, LNG facility or construction company, ExcelPlas Labs can conduct a range of analytical testing on protective coatings to assess their condition, integrity and durability. ExcelPlas Labs have extensive in-house coatings testing equipment such as DSC, FTIR, TGA, TMA, EIS, SOM, XRD, QUV etc.
http://cloud.excelplas.com/s/gkNmGLkROE4AsQT#pdfviewer
ExcelPlas Coating Labs – The Leaders in Evaluation and Assessment of Protective Coatings
Electrochemical Impedance Spectroscopy (EIS) is a powerful and sensitive tool to detect the condition of a coated metal. This technique can generate quantitative data relating to the quality of a barrier coating and the plot of data can be used to indicate the status of coating long before any visible damage occurs. EIS can also be used as a post-evaluation tool to indicate the barrier property or any change in the coating after the test exposure, such as QUV exposure, Autoclave test, Atlas Cell test, Salt Fog or Immersion test, etc. Examination of the cross section for porosity/voids in the coating vis optical microscopy. High levels of porosity can lead to internal weakness and stress cracking (can also obtain film thickness at the same time, SEM/EDXA of the underside to look for potential contamination such as chlorides, DSC to determine Tg and residual exotherm of cure, IR for positive material identification with comparison to reference authentic material, Nitrogen Analysis for base to hardener Mix ratio.
https://www.excelplas.com/products-tested/coatings-testing/
DIGITAL MARKETING
Why Advertise with PCN?
- PCN is the most published protective coating-focussed news platform worldwide and continues to lead and inform the protective coating industry on the latest in protective coating technologies, innovations, and market trends.
- Increase your engagement levels with our global protective coating audience – positioning your brand as a thought leader within the industry .
- Exposure on the no.1 ranked protective coating industry news website in terms of unique visitors delivering measurable and reportable results in the form of hard leads with fellow industry experts opening communication channels that were not available to your business beforehand.
Our Network
PCN delivers highly targeted and cost effective sales leads with a range of options to suit all budgets and needs.
Content Marketing Team – PCN with our clients from strategy through to production and distribution, promoting your protective coating solutions accompanied by industrial insight from our team to deliver measurable tangible results.
PCN Now Offering Digital Marketing Packages
- Easily create, manage and post your news to a targeted global audience.
- Generate webinar and podcast links so your attendees can quickly save the date.
- Get real-time insights on how your marketing campaigns are performing.
- Effortlessly reach practically all the players in the protective coating industry worldwide with one click.
MORE NEWS
Get More Protective Coatings News
https://www.coatingsnews.com/
This newsletter is brought to you by ExcelPlas Coating Labs (http://www.excelplas.com/)
ExcelPlas Labs provides independent testing, analysis and investigation on protective coatings to prevent corrosion.
ExcelPlas has extensive analytical capabilities for testing of Protective Coatings and Insulation Consulting for major oil and gas companies.
We conduct corrosion surveys, coating sampling, coating analysis and testing to ensure coating specifications for a wide range of onshore and offshore clients in Australia and the Asia-Pacific Region.
ExcelPlas Labs offer a full range of coating testing and analytical services to Australia’s mining, oil, gas and infrastructure sectors.
Forensic analysis for undertaking various coating based failure investigations and problem solving.
ExcelPlas Undertakes Analysis & Testing of Polymer Coating Systems including:
• Epoxy Protective Coatings
• Epoxy-Phenolic Protective Coatings
• Fusion bonded epoxy (FBE)
• Dual-Layer Fusion bonded epoxy (DLFBE)
• Liquid applied epoxy (LAE)
• Abrasion resistant overcoat (ARO)
• Three-layer PE (3LPE)
• Multi-component liquid spray (MCL)
• Heat shrink sleeves (HSS)
Testing on Coatings that ExcelPlas can Undertake includes:
• Coating identification by Infra-red Analysis (FTIR)
• Degree of Cure by Thermal Analysis (DSC)
• Coating Filler Identification by X-ray Analysis (EDS/XRD)
• Coating Microstructure by Embedding, Polishing and Optical Microscopy (OM)
• Coating Thermal Stability and Composition by Thermogravimetric Analysis (TGA)
DSC – Phase transition/volatiles / Tg / degree of cure/characterisation
TGA – Volatile compounds, inorganic mass % mix ratio
Element mapping for chlorides on paint flakes
Microscopy -Count layers and thickness of layers
-Assess porosity and voids
-Check distribution and orientation of filler particles
Condition monitoring and analysis of corrosion prevention coatings (epoxies, epoxy-phenolics)
http://www.excelplas.com/
Testing of Epoxy Coatings (LAE, FJC, FBE), heat shrink sleeves and tapes, barrier tapes and meshes.
http://www.excelplas.com/
PCN is owned and operated by ExcelPlas Pty Ltd. By subscribing to PCN you agree to receiving regular PCN newsletters as well as the PCN platform using your email contact details to enhance the performance and functionality of PCN and its analytics reports. These email contact details allow PCN to track page views and create more targeted and relevant content. PCN provides an unsubscribe link on the bottom of each PCN newsletter.